big white kitchen

How to Choose the Right Size Cabinet Pulls

Selecting the ideal cabinet pulls is an integral component of creating a stunning kitchen design. Not only do they add to its aesthetic appeal and functionality, but selecting the correct hardware also enhances your comfort level.

Proper hardware should be proportionally sized, meaning it fits your door and drawer snugly without being overly bulky or difficult to open. Furthermore, make sure it’s comfortable for you to grip if you have arthritis or large hands.

Length

Selecting the ideal cabinet pull size is essential for maximizing durability and longevity of your cabinets. A pull that is too big or small can have a detrimental effect on both the aesthetic and functionality of your kitchen or bathroom cabinets.

When selecting the ideal pull size for a drawer, one of the first things you should take into account is its width. As a general guideline, use a pull that measures approximately one third the length of the drawer to make opening easier and prevent potential trips and falls.

Another factor to consider when choosing drawer pulls is their overall height. Overly tall pulls may create an overwhelming impression, especially if the drawer is wide or has a high-end finish with decorative hardware.

white wooden kitchen in old style
Photo by Sosey Interiors on Unsplash

To avoid this issue, select a pull that is approximately half the height of the drawer. Doing so will give the drawer an updated and cleaner aesthetic without sacrificing functionality.

For cabinets with oversized drawers, opt for pulls measuring 5 to 12 inches or 13 to 30 centimeters in length. These will make the drawer doors appear proportionate to their cabinets while providing durability in heavy-duty drawers and pantries.

Cabinet pulls and knobs come in a wide range of styles, making it easy to find one that complements your home decor. When making this decision, take into account your lifestyle as well as the look you want for your kitchen.

You should consider how you will open and close drawers, depending on whether you are a busy cook or simply prefer ease of access. Pulls may be more suitable and safer to use than knobs since they reduce hand contact with the drawer.

When selecting a cabinet pull, be sure to measure the center-to-center distance of each screw hole in your cabinet. This measurement will guarantee that you select a pull with an accurate distance between each hole – an essential consideration when installing cabinet hardware correctly.

Center-to-Center Distance

Measureing the center-to-center distance between holes on cabinet pulls and knobs is an essential measurement before purchasing new hardware. This measurement is especially valuable if you are replacing existing hardware, as it helps determine the right size.

When selecting the center-to-center distance for drawer or cabinet pulls, there are a few things to take into account. First and foremost, determine whether these new pulls will go on drawer or cabinet doors.

For drawers, the Center-to-Center Distance should be slightly less than the width of the drawer front. This will enable them to slide smoothly without hitting knob or pull handles.

On cabinet doors, the Center-to-Center Distance should also be slightly less than the height of the door. This will help pulls open smoothly and securely.

Generally, the best placement for knobs on base cabinets is flush with the upper corner opposite the hinges. This will create a cleaner and streamlined appearance.

On upper cabinets, pulls must follow the same rules as their counterparts: either centered in the corner or bottom aligned (so that their bottom edge is flush with the face of the cabinet).

For a modern aesthetic, opt for pulls that are half to three-quarters the width of either your drawer front or door height. Alternatively, if you prefer something more traditional, go with longer lengths with diameters of six inches or greater and round shapes.

Another essential consideration when selecting knobs and pulls is their projection/depth. For the most part, these components don’t stand tall or wide.

Most knobs are designed to be operated by sliding your fingers inside and pulling from below, making them simpler to operate and less likely to snag or break.

Make sure the new cabinet hardware is at least as large as the old ones to protect any wear marks or unsightly areas that were previously concealed.

When measuring center-to-center distances, accuracy and readability are essential. You can use a tape measure or ruler with an accurate marking guide for this task.

Projection/Depth

Projection/depth, also known as depth, is one of the most critical measurements when selecting cabinet pulls. For many customers, how far a pull sticks out from its faceplate can make all the difference – especially those with arthritis or large hands who have difficulty gripping objects.

When selecting a pull size, it is also essential to take into account the overall height of the hardware. Generally, higher and longer pulls are easier to grasp than their shorter, wider counterparts.

Two methods exist for installing lower cabinet pulls: Method 1: Center Aligned – This approach is commonly used when installing knobs or hardware that extends beyond the bottom border. Mark the center of vertical border right on hinges, and measure out from there to where your pull will rest on that border.

grey kitchen in modern style
Photo by Kam Idris on Unsplash

Before drilling, use a level to confirm that your marks are level.

You can determine the length of your pull by measuring from one end to another with a tape measure. This measurement is especially crucial if replacing existing hardware, since older pulls often already have pre-drilled holes.

It is helpful to refer to the product page’s “Weights & Dimensions” section for this information. Typically, you can sort by this measurement to see which pulls will fit into your current cabinets or drawers.

Another essential measurement to take when ordering cabinetry is “drill center”. This measures the distance between the first and second drill holes on hardware, allowing the pull to be pre-drilled into the cabinet before installation. Common sizes for this measurement are 3″, 3 3/4″, and 5″.

Hole Spacing

When it comes to maintaining the durability and aesthetic appeal of your kitchen cabinetry, choosing the ideal size cabinet pulls is paramount. But how do you know which sizes will work best for your cabinets?

When selecting cabinet hardware, one of the most critical factors to consider is hole spacing. This setting determines how far a pull protrudes from your door or drawer front.

As a general guideline, make sure the distance between the hole and center of the pull is consistent throughout your kitchen – from door to door and drawer to drawer. This way, you can guarantee that each pull fits securely without fail.

When designing a kitchen design, the length of cabinet pulls is an important factor to take into account. For instance, if you’re going for a modern farmhouse or transitional aesthetic, opt for pulls that measure over 10 inches long to achieve an upscale appearance.

Though you may feel overwhelmed when making this choice, there are countless pulls and knobs to choose from – each offering an elegant aesthetic. Popular options include bar pulls, cup pulls, and finger pulls.

Bar pulls are typically measured center-to-center and should not exceed 1/3 the length or width of your cabinet door or drawer. They often come paired with other cabinet hardware to make opening the drawer or cabinet doors a breeze for people of all ages.

Another popular option is cup pulls, which are typically mounted on a single post and provide an extended grip from the top of your drawer or cabinet door. This provides a sleek and unobtrusive aesthetic suitable for both traditional and contemporary designs alike.

No matter your preference or the style of your home, there is a pull style and color that will complement your cabinetry and design theme. Popular options include brushed stainless steel, mirror stainless steel, or bronze.

Cabinet pull sizes most commonly come in three, four, 96mm and 128mm center to center (from one screw hole to another). These measurements will fit most standard cabinet doors and drawers.

Site Footer